how to find what subdivision an address is in

Locate Something

This tutorial is dedicated to showing how to locate something in the Package Viewer awarding. Click an detail below to acquire how to locate information technology:

• a holding
• an owner
• an address
• a subdivision
• a Section/Township/Range

How to Locate a Property

1. I know the APN (packet number)
2. I know the address
3. I know the owner'due south name

I know the APN (Parcel Number):

1. Start by opening the Search By window by clicking the magnifying glass on the right side of the map. When y'all hover over it the color will turn to dark grayness (like in the pic below) and the words Search By will display.
   


2. In the What I Know tab type in the parcel number as shown in the prototype below. (Annotation** you can type the parcel number both with or without dashes) When finished striking the Search button.
   


3. If the parcel number exists then the Results tab of the Search By window volition populate. From here you can run into the APN of a property in bold at the pinnacle of each result. In the case below, the APN is 132-75-012.
   


4. To start the search over hitting the ellipses in the height correct of the results tab and select Articulate Results and it will clear the results and take you dorsum to search once more.
   

I know the address :

1. In the top left of the map type the accost in where it says Address or Intersection.
   

   Examples of how to type an accost are:

   • 7723 pampa
   • 7723 due east pampa
   • 7723 east pampa ave
   • 7723 e pampa ave, 85212
   **it does not matter if the letters are lowercase or upper-case letter**


2. Equally you blazon the address you tin select the correct i from the dropdown suggestions as you type or hitting the magnifying glass to search.
   
3. Once the map zooms to the address entered, click on the parcel underneath the betoken.
   
4. Once a parcel is selected, you lot will be able to see the APN at the top of the side panel. In this example it is 309-16-171.
   


5. To commencement the search over hit the ellipses in the top right of the results tab and select Articulate Results and it will clear the results and have you back to search over again.
   

I know the owner'south name :

1. Get-go by opening the Search By window past clicking the magnifying drinking glass on the right side of the map. When you hover over it the color will plow to dark grey (like in the picture below) and the words Search By will display.
   


2. In the What I Know tab change the Step ii: Select what to search for: from a Parcel Number(APN) to a Parcel Owner Proper name.
   


3. Type in the possessor's name under where it says Enter Parcel Owner Proper name: (like in the picture beneath). When finished hit the Search push. (NOTE** this search may take a few seconds to run)
   

   Examples of how to type an possessor's name are:

   • Smith
   • Smith J
   • Smith John
   **it does not matter if the letters are lowercase or majuscule**


4. If the owner proper name exists then the Search By Results tab will populate. From hither yous tin can see the APN of the package and can select the right property which will zoom to it. In the example below, the APN of the first property is 101-28-701.
   


5. To start the search over hitting the ellipses in the superlative right of the results tab and select Clear Results and information technology volition clear the results and take you back to search once more.
   

How to Locate an Possessor

1. I know the APN (parcel number)
2. I know the address
3. I know the owner's name

I know the APN (Parcel Number):

1. Start by opening the Search By window by clicking the magnifying drinking glass on the right side of the map. When you hover over information technology the color will turn to dark grey (like in the picture below) and the words Search By will display.
   


2. In the What I Know tab type in the package number as shown in the prototype beneath. (NOTE** you can type the bundle number both with or without dashes) When finished striking the Search button.
   


3. If the parcel number exists so the Results tab of the Search Past window volition populate. From here you can see the name of the owner next to the line that says Owner:. In the instance beneath, the owner is SANTELER STEVEN A.
   


4. To start the search over hit the ellipses in the superlative right of the results tab and select Articulate Results and it volition clear the results and have you back to search again.
   

I know the address :

1. In the elevation left of the map blazon the address in where it says Address or Intersection.
   

   Examples of how to blazon an address are:

   • 7723 pampa
   • 7723 e pampa
   • 7723 east pampa ave
   • 7723 e pampa ave, 85212
   **it does non matter if the letters are lowercase or uppercase**


2. As yous type the address you tin can select the correct 1 from the dropdown suggestions as you type or hitting the magnifying drinking glass to search.
   
3. In one case the map zooms to the address entered, click on the packet underneath the point.
   
4. One time a parcel is selected, you volition be able to see the owner under Possessor Name: in the side panel. In this example it is ROBLES CHELSEA R.
   


5. To offset the search over hit the ellipses in the top right of the results tab and select Articulate Results and it will clear the results and accept you back to search again.
   

I know the owner's proper name :

1. Start by opening the Search By window past clicking the magnifying glass on the right side of the map. When you hover over it the color will turn to dark gray (like in the picture below) and the words Search By will display.
   


2. In the What I Know tab change the Search by from Package Number(APN) to Parcel Possessor Name.
   


3. Type in the owner'south name next to where information technology says Parcel Possessor is (like in the picture beneath). When finished hit the Search push button. (Note** this search may have a few seconds to run)
   

   Examples of how to blazon an owner'southward name are:

   • Smith
   • Smith J
   • Smith John
   **it does not affair if the letters are lowercase or capital letter**


4. If the owner name exists then the Results tab of the Search By window volition populate. From here yous can see the name of the owner next to the line that says Owner: and can select the correct belongings which will zoom to it. In the instance below, the owner of the first holding is SMITH JOHN TYRONE.
   


5. To start the search over hit the ellipses in the top correct of the results tab and select Clear Results and it volition clear the results and accept yous dorsum to search again.
   

How to Observe an Accost

1. I know the APN (packet number)
2. I know the owner'south proper name
3. I know the accost but want to see it's location

I know the APN (Parcel Number):

1. Beginning by opening the Search Past window past clicking the magnifying glass on the right side of the map. When you hover over it the color will plough to dark grayness (similar in the picture below) and the words Search By will display.
   


2. In the What I Know tab type in the parcel number every bit shown in the paradigm below. (Note** yous can type the parcel number both with or without dashes) When finished striking the Search button.
   


3. If the parcel number exists so the Results tab of the Search By window will populate. From here you can see the addresses next to the lines that say Property Address and Mailing Address. In the instance beneath, the Mailing and Property addresses are the same.
   


4. To start the search over hit the ellipses in the top right of the results tab and select Clear Results and it will clear the results and accept you back to search again.
   

I know the owner's proper name :

1. Get-go by opening the Search Past window by clicking the magnifying glass on the right side of the map. When yous hover over it the color volition turn to dark gray (like in the picture show below) and the words Search By will display.
   


2. In the What I Know tab change the Search by from Parcel Number(APN) to Bundle Possessor Name.
   


3. Type in the possessor's name next to where information technology says Parcel Possessor is (similar in the picture below). When finished hitting the Search push. (Annotation** this search may take a few seconds to run)
   

   Examples of how to type an owner's name are:

   • Smith
   • Smith J
   • Smith John
   **it does not affair if the letters are lowercase or uppercase**


4. If the possessor name exists then the Results tab of the Search By window volition populate. From here you can select the appropriate person to zoom to that parcel. Y'all can likewise see the addresses adjacent to the lines that say Property Address and Mailing Address. In the instance below, the Mailing and Property addresses are the same.
   


5. To start the search over hit the ellipses in the top right of the results tab and select Clear Results and it volition clear the results and take you back to search once more.
   

I know the address but I want to see information technology's location:

1. In the top left of the map type the accost in where it says Accost or Intersection.
   

   Examples of how to type an address are:

   • 7723 pampa
   • 7723 e pampa
   • 7723 due east pampa ave
   • 7723 e pampa ave, 85212
   **information technology does not matter if the messages are lowercase or capital**


2. As you type the address you can select the right one from the dropdown suggestions as you type or hitting the magnifying glass to search.
   
3. In one case the map zooms to the address entered, click on the package underneath the betoken.
   
4. Once a parcel is selected, you will be able to see the addresses under Property Address: and Mailing Address:in the side panel. In this case the Propety and Mailing addresses are the same.
   


5. To clear your map selection hit Clear in the top right of the Feature Information console and it will clear the selection.

How to Locate a Subdivision

1. I know the subdivision name
2. I know the MCR (subdivision number)

I know the subdivision name :

1. Showtime by opening the Search By window past clicking the magnifying drinking glass on the right side of the map. When you hover over it the colour volition plough to dark grayness (like in the picture beneath) and the words Search Past will display.
   


2. In the What I Know tab change the Search layer from Parcels to Subdivisions and the Search by to Subdivision name. Enter in the proper noun of the subdivision and click Search.
   


3. If the subdivision name exists and so the Results tab of the Search By window volition populate. From here you tin can click on a issue to zoom to the subdivision you wish to encounter.
   


4. To start the search over hit the ellipses in the top correct of the results tab and select Clear Results and information technology will articulate the results and take you back to search again.
   

I know the MCR (subdivision number):

1. Showtime by opening the Search Past window past clicking the magnifying drinking glass on the correct side of the map. When y'all hover over information technology the color will plough to dark grey (like in the picture show below) and the words Search By will display.
   


2. In the What I Know tab change the Search layer from Parcels to Subdivisions and the Search past to Subdivision Number (MCR). Enter in the MCR of the subdivision and click Search.
   


3. If the MCR exists then the Results tab of the Search By window will populate. From here yous tin click on a result to zoom to the subdivision you wish to see.
   


4. To start the search over hit the ellipses in the top correct of the results tab and select Articulate Results and information technology will articulate the results and take you back to search again.
   

How to Find a Section/Township/Range

1. Start past opening the Search Past window past clicking the magnifying glass on the right side of the map. When you hover over it the color will turn to nighttime grey (like in the flick below) and the words Search Past volition display.
   


2. In the What I Know tab change the Search layer from Parcels to Section, Township and Range.
   • Enter the data for each Section, Township, and Range. Hit Search when finished. **If you do not know the Section number, brand it bare.**
     
   
   
   
   


3. If the Department/Township/Range exists then the Results tab of the Search By window volition populate. From here you can click on a event to zoom to the section you wish to see.
   


4. To start the search over hitting the ellipses in the top right of the results tab and select Clear Results and it will clear the results and accept yous back to search over again.
   

huiepropis.blogspot.com

Source: https://maps.mcassessor.maricopa.gov/help/tu_locate.html

Share this post